Movement (Part 2)
The movement blocks move 2 motors at the same time.
(In my case, I connect Motors B and C)
Before we start! Read this:
- -> Don't worry if the code I used it's different from yours!
- -> Click here to find out why!
- Enjoy!
Challenge 1: Move in square
Notice that the robot does not turn accurately.(Don't worry! we'll fix that later)
Challenge 2: Park the robot(just like parking the car)
This is pretty much how you park the car :D
Try out new ways of parking the car!
Challenge 3: Move like the staircase
Observations
- -> Why doesn't my robot's wheel stop spinning?
- Check if you are using degrees instead of rotation!
- -> Why is does your move different from mine?
- That's because of
- * The type of ground/surface (the more slippery, the less degrees you need)
- * Maybe your robot design is a little different than mine (every robot move differently)
- * The battery of the robot (Remember to charge your robot!)
Time for a quiz!
Question goes here
Challenge for you
Hint:
The speed I used is 40% for the turn and 50% for moving backward
Notice that you can use pivot turn and then move it backward.
If you found another way, that's awesome!